fbpx

Fitting

Fitting Guidelines

TrackGrip is designed to improve stability, traction, and increase safety within the limitations of your machine. We urge caution and take no responsibility for any consequences arising from the fitted machine being operated outside of the manufacturer’s safety guidelines or specifications.

Lift track for easy fitting of the grips. No lug welding or drilling easy fit. Free Installation pack

1.Lift track off ground e.g digger

Mark track for easy fitting of the grips. No lug welding or drilling easy fit. Free Installation pack

2. Place clothes pegs or markings around the track at equal spacing. e.g five shoes

Clean out grooves in the track for easy fitting of the grips. No lug welding or drilling easy fit. Free Installation pack

3. Clean out grooves (recommend crow bar or pinch bar)

Place grip over the shoe. No lug welding or drilling easy fit. Free Installation pack

4. Loosen bolts on TrackGrip enough to fit over shoe from front to back (mind out for fingers when fitting)

Once fitted tighten bolts firmly. No lug welding or drilling easy fit. Free Installation pack

5. Once fitted do up bolts firmly not more then 120NM (94 ft lb)

From time to time check the Grips to ensure tightness. No lug welding or drilling easy fit. Free Installation pack

6. After some use recheck tightness of bolts